|
Elegance No-Dig Post Mount and Welded Surface Mount
|
BUY ONLINE NOW
Chain Link Post Concrete Mount
Aluminum Square Post Mount- internal
Aluminum Square Post Mount- external
Aluminum Railing Heavy Concrete Post Mount
Aluminum Railing Post Mount - Bolted
Fence & Railing Post Mount
Chain link Fence Posts
Post Ground Sleeves
|
A Revolutionary Fence Post "No-Dig" Installation System
without digging holes. also see DECK POST MOUNT - welded flange bottom
|
|
Elegance No-Dig Post Installation System
saves time and money. Avoid the time consuming and destructive chore of
digging holes for posts. With the No-Dig Post Mounts, the vinyl posts
only need to penetrate a couple of inches into the ground and are a few
feet shorter than regular vinyl posts. The shorter posts result in
cheaper shipping costs. Elegance No-Dig Post Mounts are sold for all
fence heights and styles, including arbors. Welded post mounts are
offered for a porch or deck railing surface mount on concrete or wood.
|
 |
 |
Parts Included in a Box
(1) Pipe post (Blank for lawns, or flange bottom for wood decks or
concrete floors)
(2) Post Mounts Brackets
(16) .410 Stainless Steel Self-Drilling Screws
|
 |
Assemble the Brackets
Take 2 Post Mount brackets and slide the inner cylinder of the Post
Mount over the outside of steel pipe. |
 |
Mark the Ground Level
Mark a heavy line on the post to annotate where ground level is to show
how deep the round pipe will be driven into the ground. Typically
bottom of the bottom horizontal rail is 2” from ground level.
|
 |
Line Up the Brackets
Place the pipe with the two Post Mounts brackets on the ground or any
level surface. (Note: This will insure that both post mount brackets are
square to insure proper vinyl sleeve installation over the post-mounts.)
Installation Note: Some applications require that the horizontal rails
of the fence sections be attached to the vinyl post sleeve using
brackets. In this instance, fasten your Post Mounts on the round pipe in
designated points allowing the fence bracket fasteners to attach to the
outer wall of the Post Mount. |
| |
 |
Drill the Brackets into Place
Using (16) ¾” - .410 Stainless Steel metal self-drilling screws attach
the Post-mounts brackets to your steel pipe. (Note: Please note that it
is not necessary to use all fasteners but the more you use the stronger
it will be.) |
|
|
 |
Drive into the Ground
For lawns, drive the Post Mount into the ground up to the line you
marked. |
|
|
 |
Then slide the vinyl post over the mount.
|
|
Porch and Deck Railing.
POST SURFACE MOUNT
|
 |
|
Bolt onto Concrete or Wood Surface
For decks and concrete, Post mounts for decks have a welded flange. Bolt
the flange to the deck and slip the vinyl post over the post mount.
Elegance post mounts provide superior strength and reliability for deck
railing |
